• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

AR 2020 OCBR Parts for Sale, Swap, Trade

Status
Not open for further replies.

stout22

Contributor
Bronco Guru
Joined
Dec 13, 2006
Messages
2,692
Loc.
Athens, AL
I have a big bearing 9" housing that came out of a 76 Bronco. This is just the housing. No shafts. No 3rd member. It's a little crusty on the outside but clean on the inside. I can get pictures if anyone is interested. Make me an offer I can't refuse;)
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Duff long tube headers, Flowmaster hushpower mufflers, complete exhaust. You would need gaskets and bolts for the collectors and a couple of hangers. The tailpipes stop short of the rear bumper. The pipe between the headers and mufflers have a up bend in them to clear the crossmember for duffs torque tamer, if you don't have that it doesn't matter, just an extra bend in the pipe.
Mufflers and pipe are 2.25"
The mufflers alone are over $100 each new, google it.

I'll take $125 for all of it and deliver to OCBR.

If you are interested in just the mufflers or just the headers make me an offer. I can cut the mufflers out of the pipes if you just want the mufflers.
I'm not hauling anything that hasn't sold before I leave, there is good deal to be had here.
 

bchesley

Full Member
Joined
Dec 21, 2012
Messages
327
I have an almost complete suspension kit I can bring if anyone is interested. Its a lightly used 5.5” all spring lift kit. The coils and leaf springs are Wildhorses and includes the 6 degree shims to properly set the rear pinion angle. Included with the kit James Duff drop steering arm and an extreme track bar drop bracket. Additionally there are two sets of radius arm bushings, 6.25 and 7 degrees, to dial in the front pinion and steering angles as well as extended front bump stops. All that’s needed is brake lines and shocks. Asking $750 or best offer.

Photos are found at this link.
https://classicbroncos.com/forums/showthread.php?t=304294
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
NP435 setup - $450

Transmission with adapter for Dana 20
Bell housing and motor plate
Throw out bearing - new in April
Flywheel with bolts
clutch & pressure plate with bolts
Equalizer Z bar, Frame pivot bracket, Clutch adjusting rod (all bolts)
new bushings still in package for Z bar
Tunnel cover plate and shifter boot
Hand throttle with intake bracket and carb attachment

Excellent condition, was just removed from my 75 a few days ago.
Trans shifter has JB fab black billet shift knob.

Flywheel could use resurfacing but was working fine. Clutch and pressure plate came from one of the Bronco vendors and was a heavy duty,etc, can't remember exactly, it was purchased years ago and installed but not run until 2017, has a few offroad trips since then. I would not hesitate to continue using.

I'm open to an offer delivered to OCBR.
 

1966tiger

Full Member
Joined
Nov 19, 2013
Messages
241
I need a really good hardtop. One that needs to be restored is ok as long as the top section or drip rails do not need to be worked or replaced.
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
02 Sensor bung that clamps on to exhaust. This came with the 2V sniper kit. You drill a hole in the pipe and then clamp this on, no welding. It works fine and I used up until switching out my trans and needing some exhaust work.

$10 if somebody wants it.
 

Attachments

  • O2 sensor clamps.jpg
    O2 sensor clamps.jpg
    168.3 KB · Views: 29

Ether

Contributor
Jr. Member
Joined
Jan 30, 2007
Messages
248
Loc.
Tulsa
Anyone have a console that will fit in a 1/2 cab?


Sent from my iPhone using Tapatalk
 

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
ISO...
EB Dana 44
Bare, complete or in between.
Thanks
 

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,354
-Duff Power brake angle bracket. Vacuum booster not included $90

- Saginaw power steering bracket for explorer front dress

- York compressor mount bracket for Explorer front dress

- Beadlocks - Marsh racing. Heavy duty. 15x8 $300

- Corbeau Baja seat. Gray never used $90

- Oil pan - OEM for Bronco 302 $45

- Duff 4.5” progressive coils $75

- Duff front shocks for 2”-4” lift (only used 1 trip at OCBR last year) $50

- 2 Bilstein 5100 for f-250 or dodge w/ 2” lift $100
 

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
Ocbr

-Duff Power brake angle bracket. Vacuum booster not included $90

- Saginaw power steering bracket for explorer front dress

- York compressor mount bracket for Explorer front dress

- Beadlocks - Marsh racing. Heavy duty. 15x8 $300

- Corbeau Baja seat. Gray never used $90

- Oil pan - OEM for Bronco 302 $45

- Duff 4.5” progressive coils $75

- Duff front shocks for 2”-4” lift (only used 1 trip at OCBR last year) $50

- 2 Bilstein 5100 for f-250 or dodge w/ 2” lift $100

PM sent for the seat
 

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,354
I have an extended clutch rod for a 2” body lift. $10 or a burger at the pavilion. ��
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
No pic but I have an explorer power steering pump that is used but good, I ran it for a while before swapping in another upgraded pump. $10 or buy Brandon another burger....he looks hungry
 

Prizefighter

Bronco Guru
Joined
Feb 24, 2010
Messages
1,192
I have some new in box axle wedges from WH.
A few speedos
Passenger seat
Rear seat that rusted where it bolts to the floor
 
Status
Not open for further replies.
Top