blazinchuck
Bronco Guru
- Joined
- Jul 14, 2005
- Messages
- 3,319
building a bronco for a customer. havent done too many 3 sp on the columns(usually autos or 5 speed, and np435) but the customer wanted to swap the stock 6cylinder for a 302, but retained the column shift. The motor is getting rebuilt now, Ive already grabbed a mid plate, v8 trans/adapter, and getting the bell housing/shift fork tomorrow.
curious if the shift rods and levers from from 6cyl trans would work with the v8 trans? Ive already loosely installed the new frame mounts for the motor on the frame. waiting to test fit the v8,trans,and tcase before burning the mounts in.
also curious if the stock equalizer bar for the 6cyl would work...i think it should tho. anyway thanks for the help
curious if the shift rods and levers from from 6cyl trans would work with the v8 trans? Ive already loosely installed the new frame mounts for the motor on the frame. waiting to test fit the v8,trans,and tcase before burning the mounts in.
also curious if the stock equalizer bar for the 6cyl would work...i think it should tho. anyway thanks for the help