• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need measurements

Bdhand

Contributor
Sr. Member
Joined
Aug 15, 2015
Messages
712
Can someone get me the measurements for the two holes that are for the Passenger seat latch bracket? My bronco was originally a bench seat and I am installing bucket seats now and i need to know where to drill new holes! Thanks for the help!
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
Easiest way to do it is set the seat in there and line up the mounting holes in the front. Then put the footman loop where the hook attaches. Then mark those holes and drill. No guessing that way
 

spap

Contributor
Bronco Guru
Joined
Jan 2, 2010
Messages
2,458
X2 with Crush and a great idea
Otherwise we all know it will be off just a bit
 

Toddpole

Contributor
Sr. Member
Joined
Jan 2, 2008
Messages
832
Look closely at the floor where the footman loop goes. There should be dimples in the floor for the bolt holes.
 

Ethansdad73

Bronco Guru
Joined
Apr 8, 2008
Messages
1,630
Hope this will help
37d8cbbba35c502188703cc221f2ae36.jpg


Sent from my SM-N960U using Tapatalk
 
Top