• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OR 1970 Baja Ready

Status
Not open for further replies.

kinkypuppy

New Member
Joined
Jan 1, 2020
Messages
2
Loc.
Camas Valley
1970 Ford Bronco
One Family owner (My father purchased it new)
All original sheet metal, glass and paint Have ALL or (almost all) receipts
NO BONDO No body panels or floorboards changed – ALL original sheet metal
STREET LEGAL CURRENTLY LICENCED IN OREGON
Most work done was in 2003
The short list:
351w Stroked to 398? Engine work done by a Pro shop in Oregon City, Oregon (have receipts)
(Engine was built for reliability not Drag runs.)
2 sets of doors – one race set without glass one original set
Kayline soft top
Bilstein and King off road multivalve shocks 24 inch +down travel
JE Stroker Pistons
MSD Ignition DUI Distributor
“OLD” Mexican 351 block (the good one)
Dyno ran in 2006 276 Torque rear wheels 201 power
Dart Aluminum Heads
Gear timing
Custom Drivelines with spares.
WIX Racing Air filters (and lots of spairs)
8 36 inch BFG Baja racing tires (not available to public)
4 CUSTOM Aluminum Rock-a-thon Bead lock rims (yes bead locks not the fake kind)
Ford 6 inch rear end Dana 44 front Custom gearing and Dutchman Axles (with spares)
Full 4130 Chromalloy cage – Score approved
Warn hubs
Warn XD9000i winch in movable front-rear mount (never used)
Spintech exhaust- (does meet Oregon DEQ noise standards)
C-6 Automatic Transmission Fully rebuilt and upgraded to race specs and a Art Carr manual gate shifter connected to a manual throttle body with lower first gearing.
Holley Truck Avenger Carburetor race prepped to run “regular” and race fuel”
Nordskog Speedometer
Centroid Gas Gauge connected to 40 gallon custom Fuel cell with bladder
Full Autometer gauges to include Air, Engine Temp, oil temp, oil pressure, vacuum , volts, amps
Dual large capacity Battery’s with manual switch
Custom Dash-console
Complete custom rewire of Bronco
LED running and turn signals
HID set of 4 above Windshield 2 HID on bumper, High output off-road celled beam headlights
Front and Rear ARB with compressor
On-board Air
Ron Davis Custom Radiator
Power Steering
Custom front-rear bumpers
Beard Racing seats
Full 5 pint harness both seats
FM Race radios and spares
CB-radio and spares
GPS – Lowrance
Front Camera mounts
Off-road sealed CD player - removable
Dana-20 Transfer Case with upgraded 4130 output shaft
 
Status
Not open for further replies.
Top