Randy's Ring & Pinion
 Message Forum
 Photo Gallery
 Event Calendar
 Book Reviews
 Bronco Wallpaper
 Bronco FAQ
 Link Back to CB!
 600+ Bronco Links!
Search All Bronco Links
Buy / Sell
 Classifieds / Want Ads
 Vendor Forum
Bronco Tech
Recent Tech Articles
  Holley Carb Tips
 Aussie Locker
 C6 203 205 Doubler
 4 Link
 Clutch Replacement
 Early Turn Signals
 C4 Improvements
 Threaded Dipstick
 NV3550 5 spd
    More Tech...

Welcome to the ClassicBroncos.com Forums.

You are currently viewing our boards as a GUEST which limits your access to viewing only. To take advantage of all the forum features please take a moment to register. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact the admin. If you've lost your password click here.

Go Back   ClassicBroncos.com Forums > 66-77 Ford Bronco > Bronco FAQ > Body FAQ

FAQ Tools
Hood Lift shocks Hood Lift shocks
Most of us like lift shocks but do not know how to get these on our Broncos.
Here are some hints and tips.

The U-Jerk yard approach.
Go down to your favorite Ujerk parts place and start looking for a mini-van that has the rear hatch shocks that are working. Get both shocks off the van and the mounting balls and hardware for the shocks.
When you go to install these on the Bronco, you must reinforce the mount points, especially on the hood. Use a couple of pieces of 3/4 inch square tubing inserted into the hood channel for the braceing. tack weld the braces in and bolt the top pivot to this brace.
The lower mount point is the one you have to decide where to mount. Mine is mounted up by the firewall on the inner fenders This gets the lift shocks out of the way when you are working on the Bronco but you must have the strong liftgate shocks to do this mount.
The other lower mount point is on the inner fender again, up by the rad support. Although this puts the shocks in a different mount configuration this mounting does not require as strong a shock.
This is the inexpensive way of doing this as the lift gate shocks sell for 12 to 15 dollars apiece in the upull yards and the little pieces of channel cost me a fiver at the local machine shop. He even tack welded them in for me for that.
The Vender Approach.
Most if not all Bronco Venders have this modification. The consensus is the firewall mount point for these. Nothing wrong with this and if you do not have the time or inclination to do the upull thing this is a great way of getting this modification. Nice thing is most of these kits come with all the hardware with them including the hood bracing.
A simple and great modification easy to do with simple mechanics tools  

  ClassicBroncos.com Forums > 66-77 Ford Bronco > Bronco FAQ > Body FAQ

FAQ Tools

Forum Jump

All times are GMT -6. The time now is 02:32 AM.

Bulletin Board Software by: vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.

This site created, owned and maintained by Jon Hanna
Copyright 1996-2021 All rights reserved. Privacy Statement
ClassicBroncos.com is not affiliated with Ford Motor Company

Page generated in 0.46391 seconds with 77 queries