Multi point fuel injected out of an '89 Crown Vic 302 and rail mounted eletronic fuel pump with in-line filter.
C4 transmission out of a 73 bronco with forced air cooled mounted on the the inner fender well.
B&M Megashifter ratchet style lock-out shifter.
Dana 20 transfer case with twin stick modification. Front axel detent retained so it doesnt allow for front axel only capability.
Dana 44 front axel from a 74 bronco with 32 sline axels, detroit locker and 4.56 gears
Rear is a small bearing 9in with 31 spline axels, detroit locker and 4.56 gears from a 1972 bronco.
First gen bronco heavy duty power steering conversion kit for rock crawling, with f-350 gearbox.
Tie rod over kit to raise the tie rod for clearance, made out of DOM tubing with Chevy 1 ton tie rod ends.
90A alternator
9000lb winch
Tom Woody extended rear drive line
5 in lift from Tom's Bronco Parts
2 inch body lift
2x7 reinforced steel rock skis under each door
Best Top soft top with fiberglass door inserts
Herculiner in tub
Spare tire carrier swings on a 1/2 ton bearing so it can be tightened without having the carrier drop when opened