• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ignition switch help

Flyfisen

Jr. Member
Joined
Jun 8, 2020
Messages
80
I have purchased a new set of door and ignition cylinders from TBP as my old key falls out while driving. I have easily changed out the door cylinders but I CANNOT get the ignition cylinder out. My old key will only turn to the right and start the rig. It will not turn to the ACC position so I can paperclip it and change it out. Any ideas/help. I think it’s the worn key that will not allow it to go to the left.
Got to be an easy fix?
 
OP
OP
F

Flyfisen

Jr. Member
Joined
Jun 8, 2020
Messages
80
Any idea what size drill bit to use. Will the old cylinder just fall out and not damage the housing for the replacement.
 
Top