KeithKinPhx
Sr. Member
- Joined
- Jan 8, 2017
- Messages
- 444
Finally working on wiring. Have Painless kit from Wild Horse which will mount in glove box. My problem is I have the Baumann controller for the 4R70W, a module for the Dakota digital dash cluster and a third module for my keyless push button start.
There doesn’t seem like a good spot for any with the in dash Vintage AC. My creative (and possible horrible) idea is I have removed the driver side vent box am going with the black ABS storage box. What if I reinforce that and then mount the modules on the sides?
Good points:
1. No drilling new holes in body.
2. Most wiring will be in under cowl rather than on new dash.
Risks:
Box integrity is important.
What am I missing?
Thanks, Keith
There doesn’t seem like a good spot for any with the in dash Vintage AC. My creative (and possible horrible) idea is I have removed the driver side vent box am going with the black ABS storage box. What if I reinforce that and then mount the modules on the sides?
Good points:
1. No drilling new holes in body.
2. Most wiring will be in under cowl rather than on new dash.
Risks:
Box integrity is important.
What am I missing?
Thanks, Keith