Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
They are used as spacers to keep the sending uint wires from getting crushed into the bottom of the floor board. The aftermarket tanks by NWMP like shown in the first pic use a similar spacer as well.
Many years ago (back in the ebr.net days, prior to the old Bronco.com or Classicbroncos.com) I had taken all the dimensions and drawn them up and posted them on the net though another members website. They might still be floating around out here somewhere?