• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Can a Griffin 4 core with electric fan fit

Miker

Contributor
Bronco Guru
Joined
Jul 15, 2009
Messages
1,571
Can a Griffin 4 core with electric fan fit with an Explorer serp system?
Someone please tell me "yep, no problem",,,,,,,,,,,
 
Last edited:

76Broncofromhell

Bronco Totalitarian
Joined
Jul 30, 2001
Messages
4,217
Loc.
Reno, NV
Measure perhaps?

Anything can fit with enough modification. Since your question is about as cryptic as it gets, I'm leaning towards NO.

How about a bit more specifics about what size radiator, how you're going to mount it, what kind of fan you're going to use and your fabrication skills. That might better help others answer your question.
 
OP
OP
M

Miker

Contributor
Bronco Guru
Joined
Jul 15, 2009
Messages
1,571
Sorry to be so "Cryptic" Here ya' go:

Griffin Aluminum Radiator
Part # 7-266BV-BAX
core size: 19.00x20.88x2.22
inlet/outlet: driver top - pass bottom

Fan
15.50
part # TA16A1004
DCM-Tex Straight blade pull

I have no fabrication skills to write home about

This description is about as good as it gets, there, did my best to be not so cryptic Parts are in FL so I cant go out and measure. I'm gonna try to mount it in the stock position as best it can go, if it can go.

Any help, as always, is appreciated.
 

Attachments

  • Griffin part number.jpg
    Griffin part number.jpg
    80.1 KB · Views: 5
  • griffin part number (2).jpg
    griffin part number (2).jpg
    58.7 KB · Views: 5
Last edited:

j.blakeslee

Bronco Guru
Joined
Oct 16, 2008
Messages
1,558
Loc.
NASSUA NY
i have a ron davis and it ruffly 24 x 18 x 3

and there about 3 3/4 inches of space to the front pulley off the water pump..
 

ghundt

New Member
Joined
Dec 21, 2009
Messages
15
I have a 66 with a 302 standard belt system, i have a 4core radiator and a black magic cooling fan. In order to make it fit i had to modify/ remove the core support to get proper clearance between the fan and the water pump pulley.
It did take some fabrication but that's half the fun.
 
Top