DIY kick panels

[Torkman66]

I was surprised to discover there were no kick panel trim options. I’ve restored several mustangs over the years, they have a nice plastic piece for the interior kick panel. Decided to buy some black plastic stock. Made a pattern out of cardboard and then transferred to the plastic sheet. Lined the edges with door edging to give it a finished look. Attached to kickpanel area by the door strap bracket, dash brack, and two screws contained in screw caps. Turned out good. I’ll post more pics of them after the carpet is finished.

 

[Howard2x4x4]

I was surprised to discover there were no kick panel trim options. I’ve restored several mustangs over the years, they have a nice plastic piece for the interior kick panel. Decided to buy some black plastic stock. Made a pattern out of cardboard and then transferred to the plastic sheet. Lined the edges with door edging to give it a finished look. Attached to kickpanel area by the door strap bracket, dash brack, and two screws contained in screw caps. Turned out good. I’ll post more pics of them after the carpet is finished.
View attachment 923852 View attachment 923853 View attachment 923854

Those look GREAT! Kudos, Sir!

 

[daddycreswell]

Nice job, really cleans the area up. You saw a need and fixed it.

 

[bigmuddy]

nice work! I have seen a few over the years but usually they seem to have been installed to cover and hide rust.

 

[hyghlndr]

Looks good