• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Edelbrok Pro Flo 4 Harness Layout

geofocusinc

Newbie
Joined
Dec 3, 2013
Messages
49
Were you able to use the original throttle assembly without modifying anything except the linkage?
I did not modify the assembly it was just the right length and height, but I have a body lift. Without the BL I think the possibility of linkage binding on the intake would be a real danger.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
8,614
What Ratbilt said.

Add:
- Holley fuel mat so you can run the tank down to 1 gal or less OR design in multiple fuel pickups in the tank

- and the Felpro gaskets absolutely must have metal core. Do not under any circumstances use a FelPro that doesn't have the metal core.

More important than you think to hook directly to the battery - both neg and pos.
 
Top