Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
When replacing floorboards, what did everybody do about gas tank, lines, etc. Do I need to remove all of this before I start? I sure wish I could just start grinding or cutting them out.
Could leave in place but take precautions ..nylon lines extra extra precaution ,,a wet piece of cardboard as a shield one way....also if using a cutoff wheel and sparks are flying protect windshield and door glass the sparks will l embed in glass.