• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Header vs. Fuel Line

ltatro

Jr. Member
Joined
Feb 10, 2002
Messages
129
Loc.
Michigan
Just bolted up driver's side header and noticed that the clearance between the header collector and the fuel line is pretty slim. Anyone have a fuel line meltdown because of this? Guess I could insulate the line or maybe go with a steel line and reroute it around (lower on the side of the frame) until it clears the header area. Anyone else solve this problem or have ideas?
 

76Broncofromhell

Bronco Totalitarian
Joined
Jul 30, 2001
Messages
4,228
Loc.
Reno, NV
Go with a steel line and reroute it onto the top of the frame rail. You will save yourself a lot of headaches and vehicle fires.
 
Top