Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Can someone post up the measurements of the dash pad? Specifically, the distance from the front edge up near the windshield to the rear edge, and the depth of the pad, top to bottom.
Best measurements I could get (based on the 68-77 style dash) were.....
Windshield to back edge:
approx 6-1/4”- 6-3/8” from the wider/passenger side
approx 4” on the narrower/driver’s side
Depth:
approx 4” top to bottom
Tried taking some pics of just the dash but the tape did not show the measurements accurately. Put some blocks of wood on each side of the dash and ran the tape in between. Pics look off, but give you an idea of the width.
Best measurements I could get (based on the 68-77 style dash) were.....
Windshield to back edge:
approx 6-1/4”- 6-3/8” from the wider/passenger side
approx 4” on the narrower/driver’s side
Depth:
approx 4” top to bottom
Tried taking some pics of just the dash but the tape did not show the measurements accurately. Put some blocks of wood on each side of the dash and ran the tape in between. Pics look off, but give you an idea of the width.