Measurement with 3 1/2'' lift and 6" WCB arms

[mnido]

I need a measuremnt from the bottom of the frame rail to the top of a West Coast Bronco 6'' extended radius arm, right where the shock mount bracket is welded on the arm. This is on a 3 1/2" lift Bronco fully assembled. If you need a picture of what I am talking about let me know.Thanks!!!!

 

[mnido]

Please !! Someone!!

 

[asinor]

The extended arms shouldn't raise or lower the axle to frame. I *think* unlifted is 7", so 3.5" should be 10.5". I'm to lazy right now to search, but the info is either in the tech section here, or the faq/documentation on one of the vendor's sites.

 

[broncaholic]

I installed the WH extended radius arms and my front end is higher than before. This is probably due to welding the brackets on my frame at an angle to unload the radius arm bushings that were in a serious bind with my previously installed 3.5" WH coils. (Just to add to the confusion).