• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mounting bracket suggestions for Tuffy Center Console

syndicate1

Contributor
Full Member
Joined
Feb 14, 2015
Messages
421
I want to install a tuffy center console using the seat bolt locations instead of drilling holes through the floors. I’ve searched online for mounting bracket kits like this and haven’t found anything. Any suggestions on how to mount the console to the seat bolt locations? Or where I can find something that will work?


Sent from my iPhone using Tapatalk
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
43,551
I think that’s how mine is mounted. I didn’t do it though, so don’t know just how far into your comfort zone it would be to weld together a fairly straightforward bracket.
Maybe Member 904Bronco will see this and chime in on how he did it.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
5,348
Loc.
San Martin, CA
I have made variations on this bracket for a few of my Broncos as they had Bench seats and the seat belt holes don't line up.

So with the Tuffy mounts, I usually weld a 1' square tube to the bracket and then drill some holes where I put nut-zerts in them to position the back of the box. Then I only need to drill one hole in the floor at the front of the box to secure it. The front mount also needs to be spaced up, another piece of 1" square tube usually does it.
 

Attachments

  • IMG_20210422_183657471.jpg
    IMG_20210422_183657471.jpg
    312.5 KB · Views: 35
  • IMG_20210424_155543679.jpg
    IMG_20210424_155543679.jpg
    208.7 KB · Views: 30
  • IMG_20210424_165155418.jpg
    IMG_20210424_165155418.jpg
    204.9 KB · Views: 30
  • IMG_20210424_165641437.jpg
    IMG_20210424_165641437.jpg
    228.9 KB · Views: 30
  • IMG_20171107_141144381.jpg
    IMG_20171107_141144381.jpg
    176.8 KB · Views: 34
Last edited:

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
79,638
I have made variations on this bracket for a few of my Broncos as they had Bench seats and the seat belt holes don't line up.

So with the Tuffy mounts, I usually weld a 1' square tube to the bracket and then drill some holes where I put nut-zerts in them to position the back of the box. Then I only need to drill one hole in the floor at the front of the box to secure it. The front mount also needs to be spaced up, another piece of 1" square tube usually does it.

Thanks for sharing that...
 
Top