• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

NV New Yukon Chromoly axles Dana 44/9" and '76 housings.

Status
Not open for further replies.

kholding

Bronco Guru
Joined
Sep 6, 2010
Messages
2,209
Loc.
Las Vegas, NV
I have some brand new Yukon chromoly axles for both Dana 44 and Ford 9". I also have a dana 44 housing and Ford 9" housing from a '76 Bronco that have been sandblasted (dana 44 was painted black as well). The Dana 44 is missing the bearing caps. Decided to go with a full width set instead. I will post pictures tomorrow. $700 for everything.
 
OP
OP
kholding

kholding

Bronco Guru
Joined
Sep 6, 2010
Messages
2,209
Loc.
Las Vegas, NV
Pictures...The brown bag next to the rear axles contains new bearings/plates/seals.
 

Attachments

  • IMG_2833.jpg
    IMG_2833.jpg
    215.9 KB · Views: 63
  • IMG_2832.jpg
    IMG_2832.jpg
    236.3 KB · Views: 54
  • IMG_2830.jpg
    IMG_2830.jpg
    218.5 KB · Views: 51
  • IMG_2837.jpg
    IMG_2837.jpg
    130.3 KB · Views: 60
  • IMG_2839.jpg
    IMG_2839.jpg
    147 KB · Views: 51
  • IMG_2835.jpg
    IMG_2835.jpg
    137.4 KB · Views: 47
  • IMG_2836.jpg
    IMG_2836.jpg
    60.6 KB · Views: 46
  • IMG_2834.jpg
    IMG_2834.jpg
    185.7 KB · Views: 40

reynard101

Bronco Guru
Joined
Aug 19, 2006
Messages
1,098
No bearing caps on the Dana 44? Aren't they machined specifically for each axle?
 
Status
Not open for further replies.
Top