MI Parting out 1970

[buildabronco.com]

Have this 1970 we can part out. Going to use the frame and body for a wheeler. Any small parts that you could use let me know. I know there is not alot left. Was a 6 cyl. 517-583-1111 or parts@buildabronco.com

 

[bluemonday]

How is the tailgate? Pm me. Thanks

 

[buildabronco.com]

Tailgate is rusty and dented. Would make a good trail tailgate, thats it.

 

[BoureeOne]

Is the master cylinder any good. I have a 66 that I will begin restoring soon. Am being given a dana 44 front end with disc brakes. The 66 has the stock MC. Would this one work????

 

[buildabronco.com]

Not sure of the condition of the master cylinder but yes you could swap it in. We bought it as a parts truck non running.

 

[Airmapper]

How are the front turn signal buckets? If they are salvageable and the connectors are not rusted out I'd be interested in those, plan to cut on them for the "Alice" mod.

 

[66Bronco]

I could use the Drivers seat mounting sliders.


-Terry

 

[buildabronco.com]

Seats are out of something else not stock. I will take the front signal buckets out to see if they are salvageable.

 

[Airmapper]

... I will take the front signal buckets out to see if they are salvageable.

Thanks, I'm mostly concerned with where the bulb seats being good.

 

[BoureeOne]

Any chance this has a Dana 44 front end? If so, disc?

 

[El Kabong]

Do you have any windshield knobs?

 

[flaconinja]

I need a charcoal canister and vapor separator if its got them. Pm me if you have them still.

 

[Funrunr]

Do you have a stock radio, rear seat belts?

 

[buildabronco.com]

No windshield knobs, front axle is 30 with drums, I do have some radios but not sure on condition. We have seatbelts.

air mapper I dont think you would be interested in the front light buckets, very rusty. I will go look for the charcoal and vapor canister.

 

[fastcarkenny]

how much for that T handle for the transfer case with the button?

 

[buildabronco.com]

T handles are $20 plus shipping.