Pitman Arm help

[66 Bronco Dave]

What degree is the bore in EB pitman arm. Looking to ream the Xterra pitman to see if it will work without the jeep sector swap. Thanks

 

[thegreatjustino]

Seven degrees

Speedway Tapered Ball Joint Reamer, 7 Degree

Tapered reamers for proper fitting of ball joints to spindles, tie rod ends to spindles, etc. These have 1/2" shank. The 1-1/2" per foot reamer, also known as a 7° tapered reamer, works with Speedway ball joints 917-20031 K6024, 917-20036 K727, and 910-34323 K772. Measures a little less than...

www.speedwaymotors.com

 

[66 Bronco Dave]

Seven degrees

http://[URL]https://www.speedwaymotors.com/Speedway-Tapered-Ball-Joint-Reamer-7-Degree,2918.html

[/URL]

Thanks

 

[73azbronco]

Pretty sure all the reamed parts anywhere on EB use 7

 

[Apogee]

1-1/2" taper per foot = 7.13°