Power Steering 170/200?

[72_EB]

Anyone done or seen one? I'd love some pics if you have any.

 

[jim3326]

I did this so my wife could drive the '66%) I robbed the steering box off a '73 and fabbed a bracket for a Delphi pump I had. I'll get some pics to post up later.

Jim W.

 

[Explorer]

Really not a problem. BC Bronco sells a pump bracket, though I used the bracket from a 65 Mustang. Worse issue is mating up steering box to steering shaft. Couple of way's to do this. Here is my setup.

 

[72_EB]

Cool. Thanks guys. My other question was with the pulleys, but looks like I don't need to worry about a double waterpump pulley (my crank pulley looks like yours Explorer). No squealing or weird problems with the belt so far?

 

[Explorer]

Actually I changed to a dual V waterpump pully from Classic Inlines. This was added after pic's were taken.

 

[blazinchuck]

Really not a problem. BC Bronco sells a pump bracket, though I used the bracket from a 65 Mustang. Worse issue is mating up steering box to steering shaft. Couple of way's to do this. Here is my setup.

saweeeeet looking 6!