Not the typical Dana stuck problem
1969 just finished a frame off rebuild with a 302 attached to nv3550 with a "new" rebuilt Dana 20 from tom's
The plungers never have moved much since I installed it
Hoped that once I got it on the road I would be able to try all the tricks on the web
Rocking,going in reverse,unhooking linkage
Nothing has worked
Desperate not to have to remove it
T handle
Both plungers are extended and move less than 1/4 inch
Talked with toms and they recommend a pry bar
Couldn't get one in there to do any good
Help!?!?
1969 just finished a frame off rebuild with a 302 attached to nv3550 with a "new" rebuilt Dana 20 from tom's
The plungers never have moved much since I installed it
Hoped that once I got it on the road I would be able to try all the tricks on the web
Rocking,going in reverse,unhooking linkage
Nothing has worked
Desperate not to have to remove it
T handle
Both plungers are extended and move less than 1/4 inch
Talked with toms and they recommend a pry bar
Couldn't get one in there to do any good
Help!?!?