casadejohnson
Bronco Alchemist
- Joined
- Jan 21, 2005
- Messages
- 3,587
My EFI conversion left me stranded this weekend. I was up in the mountains cutting a christmas tree and the bronco started cutting out on me. I started to head home and it died completely. I pulled a fuel line and found that I was not getting fuel from the pump. I figured I had a bad pump but once I got home I found that the fuel pump bench tested fine and that I was not getting power to the fuel pump. I checked the fuel pump cut off and it was ok too. just to be sure, I used a jumper wire and bypassed the switch. I have not pulled any codes yet because the battery went dead trying to get it started. Any Ideas what would cause this?