• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vent Window and Felt Channels

MIDEVIL214

Jr. Member
Joined
Feb 7, 2005
Messages
166
Does the vent window need to be removed to install the single felt piece that does the top and rear of the door? The overhead felt piece two prongs that look like they may interfere.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,432
Loc.
Earth
I’ve never had to removed the vent window channel to install that piece of felt.
 
OP
OP
MIDEVIL214

MIDEVIL214

Jr. Member
Joined
Feb 7, 2005
Messages
166
Ok thanks. I didn’t touch the vent window last time I installed them. One did sag a bit in the middle. Wasn’t sure on that. Can the vent window come out without pulling the main glass from the regulator?
 
Top