My discharge port is on the wrong side. What I am wondering is the head seams to be symmetrical, can I remove the head and valves, and turn them 180 degrees to reverse the positions of my ports??
I am discharging alot of oil, the compressor is at 45 degrees with my discharge port on the bottom, and I have already plugged off the front port in behind the front seal.
TIA!!
Dave C.
I am discharging alot of oil, the compressor is at 45 degrees with my discharge port on the bottom, and I have already plugged off the front port in behind the front seal.
TIA!!
Dave C.