York Serp pulley needed..source?

[nvrstuk]

Where can you get new serp pulley's for York OBA compressors or where can you find a list of shaft sizes for finding boneyard applications? Mine currently has a double v-belt pulley that is over 7" diameter...

My York has a tapered shaft and is 5/8" at the small end of the taper and 7/8" diameter at the largest part where the pulley seats.

TIA

 

[allenfahey]

I did a search but couldn't find a part number but you are looking for a Kenworth part. I got mine at a Kenworth dealer near DC for about $70.

 

[Broncobowsher]

'79 mustang

 

[nvrstuk]

Thanks, I'll check both leads out.

I'm looking for a Serp belt/clutch setup...

 

[bronconut73]

I have heard that Volvo's ran Yorks for awhile too.

 

[allenfahey]

Thanks, I'll check both leads out.

I'm looking for a Serp belt/clutch setup...

The Kenworth is serpentine. Comes with pulley and clutch in bare steel.

 

[nvrstuk]

I'll try them tomorrow! Thanks for the pic too... I'm making brackets for mounting my TC pump and York this weekend...

 

[mattt]

'82 Mustang 5.0

 

[70_Steve]

I'll try them tomorrow! Thanks for the pic too... I'm making brackets for mounting my TC pump and York this weekend...

I might have one at home. Bought it when thinking of going full serpentine, but decided to get the combo alternator pulley and leave the York as a v-belt (if I ever finish that project).

Let me check on the shaft size and part number...

Make ya a good deal!!!

 

[welndmn]

I think mine was 50-60$ from Ryder, new.

 

[nvrstuk]

81 bucks from Ryder... thanks