• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Name That Part - round 2

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,697
Ok I am in the final stages of emptying the garage and found some loose parts that I do not want to discard without first identifying.

For size reference, this stuff is sitting on 2 paper towels.

Thanks in advance. ;D

Picture 1 HOOD LATCH (DUH) In here by mistake!
P1020828.jpg


Picture 2
P1020827.jpg


Picture 3 WEIRD BATTERY COVER???
P1020826.jpg


Picture 4 ENGINE THROTTLE RETURN SPRING BRACKET
P1020845.jpg


Picture 5 MUSTANG MOTOR MOUNT???
P1020835.jpg


Picture 6 RIGHT REAR REFLECTOR BRACKET FOR TIRE CARRIER
P1020844.jpg


Picture 7 LEFT WINDSHIELD WIPER COVER BRACKET
P1020843.jpg


Picture 8 FENDER BRACE
P1020842.jpg


Picture 9 QUARTER PANEL BRACE
P1020841.jpg


Picture 10 FUSE PANEL COVER
P1020840.jpg


Picture 11 COLUMN SHIFT LEVER
P1020839.jpg


Picture 12 STOCK EFI THROTTLE CABLE BRACKET
P1020838.jpg


Picture 13 WIPER WIRING COVER
P1020837.jpg


Picture 14 TAILGATE POST ACCESS COVER OR FS FRONT BODY MOUNT COVER
P1020836.jpg


Picture 15 LATCH BRACKET FOR CENTER OF LIFT GATE
P1020834.jpg


Picture 16 WIPER DELAY BRACKET???
P1020833.jpg


Picture 17 WIPER DELAY BRACKET???
P1020832.jpg


Picture 18 MASTER CYLINDER BRAKE LINE SUPPORT BRACKET
P1020831.jpg


Picture 19 WIPER ASSY. COVER?
P1020830.jpg


Picture 20 CANISTER PURGE HOLDER
P1020829.jpg
 
Last edited:

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
Picture 2:
Picture 3:
Picture 4:
Picture 5:
Picture 6:
Picture 7:
Picture 8: Fender Brace
Picture 9: Quarter Panel Brace
Picture 10: Fuse Panel Cover
Picture 11: Column Shift Lever
Picture 12: Back up Switch Bracket?
Picture 13:
Picture 14: Tailgate Post Access Cover
Picture 15:
Picture 16:
Picture 17:
Picture 18: Master Cylinder Brake Line Support Bracket
Picture 19: Jack Bracket (goes on drivers fender bolt)
Picture 20:
 
Last edited:

Galt72

Contributor
Newbie
Joined
Apr 21, 2004
Messages
618
#13 screwed into the windshild behind the inside wiper arm. It kept the wiring in the channel and away from the wiper motor arm.
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,697
Finally! A way to restrain those stupid wires after all these years!
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,045
7 looks like the water gutter used at the top of the tailgate to channel water and retain the weather stripping...
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,200
You should put all the pictures back up when they are all idnetified that way someone can search this thread out and possibly answer their own questions in the future... just a thought.
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,697
You should put all the pictures back up when they are all idnetified that way someone can search this thread out and possibly answer their own questions in the future... just a thought.

That is my plan. Just think it is less clutter if I removed them during the process. We are definitely on the same page.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Pic 15 is the bracket that holds the aux fuel tank retaining strap

really? I thought it looked like the latch bracket that fits up in the center lift gate. The notch is for that stop thingy that sticks up on the tailgate.
 

jboomer

Sr. Member
Joined
Oct 17, 2007
Messages
506
Loc.
Havelock, NC
really? I thought it looked like the latch bracket that fits up in the center lift gate. The notch is for that stop thingy that sticks up on the tailgate.

You would know better than me...I removed a similar bracket a few months back when I deleted the aux tank. I've not opened the lift gate yet.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
hard to tell size. the bracket you are thinking of is pretty big. This one looks small.
 
Top