Recent content by Bferrari

Yes, Celica seats with Dodge Caravan headrests.

Hi Mark - my glovebox door only interfered with the cage by 1/2” so I ended up moving the glovebox door over 1”. Keep in mind, I bent my own cage and fit it tight so my clearance to the glove box door was minimal. Depending on what you do with your cage will determine the clearance you will need.

Nice work Rob! Looks great!

Looks great Rob! Downhill from here!

Fuel pump should pull the fuel on its own, make take a bit of cranking to get it up to the carb. If your not getting fuel, start with the obvious, do you have enough fuel in the tank to reach the pickup? If so you can try pulling the line off at the carb and crank away until you get fuel. If...

My hat is off too you, I pulled mine in the shop for a few month cleanup to make it a hunting rig .... 3 years later and now I don’t want to get dirt on it! Nice progress! Look forward to seeing the finished product.

I like the rocker covers! You are definitely making your rig one of a kind. Keep it up, love seeing the progress!

I haven't had any issues or significant problems however I did install a sacrificial annode on mine. I am of the theory that it is better to be safe than sorry.

I am running a 3.5 suspension on mine as well. I ended up ordering new driveline from woods. They asked a few questions, walked me through all the measurements they needed off of my truck and a few days later they were shipped. I haven’t had any issue with mine. May be worth a call to woods...

Does your truck have a suspension lift? Body lift does not affect the driveline so if you are only running a body lift, put the original driveline back in. May check the u joints in the old shaft before reinstalling.

Here is a pic of the camera And a pic of the screen

I ended up using a double din stereo that had the rear view camera option with it. Love it! I use it all the time, especially parking in my garage and am able to back up to the same spot each time. I am running plate bumpers and mounted the camera to the bottom of the bumper. Works well and...

Nice work! The reproduction panels are far from a perfect fit so keep plugging away fitting and tweaking them until you are happy with them. Your methodology of putting everything together to check fit prior to burning it in is on point. One thing that may make it a little easier during this...

Two words ... bad ass!

I was thumbing through the wants adds of the Shelby County tribune when this classified advertisement caught my eye ..... Lol! TheChiro - what’s your end game? Are you looking for a beater or want something you can make nice? May cost you quite a bit to straighten out everything on this one.