Recent content by Desert Rider

Glad to see your not letting the blue one go...yet

So, I took my bronco into a local transmission shop last week, and had the pan gasket and seals replaced on my rebuilt AT tranny (C-4) to hopefully stop a small leak. When I picked up the bronco, I was told that the tranny was topped off with Dex/Merc tranny fluid instead of Type F. I asked...

Jeff Steps Try Driven Auto (Randy) in Phoenix. He makes a nice step...

I'm in, Thanks

After months of contemplating, I finally decided to splurge on new wheels and tires. Background: A couple of years ago I replaced my stock bronco gearing with 4.10s, added a 3.5” WH suspension lift, and installed 33” X 9.5” X 15” BFGs ATs (pizza cutters) on the stock wheels. In general, this...

It is not coming from the actual brakes, it is originating from the brake pedal/linkage...between MC and firewall.

I have a 1976 bronco with, I assume, stock brakes. When I apply the brakes by pressing on the brake pedal, there is a noticeable grinding or rubbing felt (and heard) while the pedal returns to its original position. This grinding/rubbing seems to originate from outside the cab, between the...

Reserved Spot I just reserved one of the last RV slots at the Moab RV Campgroung today. The campground will be full!

I have a gas leak where the fuel filter connects to the carb. I replaced the fuel filter, and still have the leak. Any suggestions? Can I use a tephlon tape or goop?

I purchased a rear bumper from Tyler (Idaho) about three years ago. Great bumper, worth the wait. Look at older threads regarding Tyler (Keystone Fab), and you will see the same issues with non-communication, but he seems to always deliver albeit it can take months. Hang in there.

I purchased a rear bumper from Tyler (Idaho) about three years ago. Great bumper, worth the wait. Look at older threads regarding Tyler (Keystone Fab), and you will see the same issues with noncommunication, but he seems to always deliver albeit it can take months. Hang in there.

Did not get to go to Las Cruces today on trail run. :cry: Instead helped my family bail and load hay here in the North Valley of Albuquerque. [/URL][/IMG] [/URL][/IMG] [/URL][/IMG]

Mars - can you load up some pics of our last Mt. Taylor Run...

Pic of trailer with no ramps