Recent content by hendershot

Mine hit the pass inner fender and both frame rails. I decided to go with chucks headers and they hit the inner fender also. BTW I have a 351w and 1" body lift.

I'm runnig 285/75 r16 on procomp rims which equals out to 33 x 11. There are little more expensive but I prefer the look of 16s then 15s. But if your stuck with 15s go with the 33s.

Thanks guys, I do have a 1 inch lift and I belive my only solutions are to go with different headers or cut the inner wheel wells which I believe a number of people have done. I might reconsider cutting them and putting in some perforated sheet metal (my local metal supplier carries many...

I looked at the hooker 9814 but there pricey for something with 18ga tube, 5/16th flange, and just painted. I'll probably call chuck next week and see when he expects his headers to be in stock. Thanks guys.

Well i just received a set of hedman headers #89410 and the paint is all chipped up and rust is all over the flanges. Not a good start. Then went to installed them and the usual both collectors hitting frame and then two tubes on the passenger side is hitting the inner fender (i'm not going to...

No, they just have seals on the wrong side now. The gaskets were only 15 bucks, about the same as fel-pro. Oh well I'll go pick up some fel-pros tomorrow and start over. Thanks for the replies.

Thanks guys. There actually Edelbrock gaskets with the seals on them. I'm gonna be safe and redo it. But will Fel-pro printoseal gasket work fine I only ask because performer instructions recommend edelbrock ones.

So I just got my new performer intake fo my 351w and a friend told me to install the gaskets with the rubber square beads around the ports to the head side. Well know doing my research I realize that's wrong. So my question is, will this be okay or should get some new gaskets and start over?THANKS

Thanks for the replies. Sorry i'm replying late, I almost gave up hope. The reason was I thinking of using pucks is because I already bought the stock lift bushing and couldn't justify 80 bucks to get a new set (as opposed to 8 dollars for the pucks). Maybe i'll stop at one of the local steel...

So is this a dumb question or what. The main reason I ask because I was worried about the steel sleeve pushing up into the puck over time. So i'll just put washers on top of both to be safe.

Hi, I'm in the process of putting in new body bushings and decided to put in a 1 nch hockey puck lift. My question is do I need to put the steel washer on top of the puck, in between the new bushing and the puck, or both? Thanks

Hey mono, which 4x4 shop is that in MN? Also I was just out to French lake and your right they have bunch but there all pretty picked. That place is amazing hundreds maybe thousands of old cars!

Looks GREAT! Top notch. I'm curious about how much you paid for the Arma coating, i've got one locally. But curious to see if you the prices are similiar shop to shop. Thanks

If you have the equip. and capability drill out those spot welds in the lower piece and put in a new piece. I replaced the complete lower on mine front and back. It came out great! the only difference is that little hump ins't there anymore but a Bronco guy is the only one that might notice it!

Nice color choice. I also painted my Boxwoood green in the fall, except it's a half shade darker because in the PPG Deltron line it's called gray green if I remember correctly (original color on the old Frazier's). The tan interior should look good. I was thinking of going with red seats to...