Search results

Now ask the Correct question.Anyone have a Narrowed Ft clip running a 8274? There is 19 in missing in the Middle of the Grill so the ends are really short in comparison to a Stock Bumper width.

They will shut off if the switch gets too Hot as it has a Internal Thermal Overload in it.Replace the Headlight switch with a New 1 not a 40 yr old 1.

I asked you on CB4x4 if you still had it and you never responded.

I also have all of the bolts to go with it. Here are a few pics.

I have the right and left brackets with the PS reservoir and PS pump attached. I do not have the AC compressor, alternator, fan, or water pump, but I can go get these parts for additional. Pics will be up soon. $200 + Shipping from SC.

He didnt drink a drop of anything other than Chick Fil-A sweet Tea.The Big issue is with the starter switch and the old Red top Optima as if you turn it all the way right it dont start but tries to catch when you let off the Key.Superbowl tomorrow so no Bronco Work.

Thats a Tow-Rig and a Motorhome all in 1.Drop the Roof 2 Ft and drag whatever you want behind it and call it done.

You dont want me Drinking Jack and Coke as I get mean as Hell But I will Drink his Cousin Jim and Mountain Dew.Then you have a Super Hyper Drunk to deal with.He He

Remember I have to Drive back to SC on Sunday but other than that it is ON.

Just the Normal Bronco ones that leak out all over the place.I hate firing a New project as there are always leaks Especially when you dont tighten anything down.He He.Got a Major Tranny Line leak as the steel tube is split where it goes into the tranny.

Its Alive.We fired it up about 1/2 hr ago.I just sent Robert to get a Belt and some Fluids so we can run it Longer but it sounds Sweet with the WH Ceramic Shortys and No Exhaust.He He

I will be down also but on my Bike for Bike week so I need a pasenger seat to ride in.

Ground wire from Battery to back of the Block is 2 feet long and brand new and another Ground Strap it tied from the same Block Bolt to the Welded on shock Hoops But I dont remember cleaning any paint off the conections to make a good Ground.I will add a Body Harness Ground and see what...

http://tccoa.com/ should be able to help you out.I am 915.0Sport on there and have a 91 5.0 Sport T-Bird as well as EB's

I have pictures of mine with white flairs and Black flairs.I pmed you my e-mail address as I cant post pictures.

My sisters 6 banger Maverick had the same tranny ailment but ran like that for years.My BIL's Maverick was a 302 3 on the tree Grabber edition and it was a very fast ride until they got rear ended by a old lady doing 60+ and they were dead stopped.

If you are installing a Art Carr shifter on a C-4 you can cut the x member between the shifter rails and add on a piece of tubing to make the extra recess you need to get it to drop down.It slides right between the rails once done but requires you to remove the X member to weld.I believe I have...

You will probally need some surgery to make your unit 10 in longer.He He

The problem is the MAF wire is to short without unwrapping it due to where it is mounted on Roberts rig.It just needs some unwrapping and another longer piece of of loom and all will be good again.If we actually had some room on the firewall without there being a battery behind the dash we...

This a E-bay Bronco specific Harness made by 4wheelinjunky on E-bay and is a good 3 piece harness for the money.It will take some extra work if you arent using all the stock ford pieces like a steering column but it even includes a new ignition switch but it will not fit in the stock hole...