Search results

Ill take the loop.

Thanks T-Bird. I used a pioneer three way 6x9 since I didn’t want to cut the door panels and had tried the fiberglass speaker panels but didn’t care for the look. I also have cheap rear speakers for now that tuck under the rear quarter panels and are hung from the roof hole mounting points. Last...

Also found this thread for 67 seats from back in 2014... https://classicbroncos.com/forums/showthread.php?t=246001&highlight=1967+seats

I messaged the member who originally posted the pics on this site and he believes this is a 1967 latch/loop. What had me questioning if it was ever offered. I recently started to restore a set of 66/67 seats and noticed that my passenger seat has a threaded nut and cutout on the inside rear leg...

I’ve read that as well, hoping to put one on like the one in the pic. Not sure what year the one I’m showing is or how to add later model mechanisms to the 66 seat frame.

Not really sure if the holes are threaded or not since these pics are ones I found while researching the footman loop for my 66.

Restoring a set of 66 seats and would like to add the 67 passengers side latch and plate that bolts to the floor.

I’ve searched the forum and there are plenty of discussions around the footman loop/latch for 68-77 but not much on the 66’s. I’ve read that some never came with a latch and others did. It appears that the design is different for the latch and loop then the later years. I’m in the process of...

If you say SNS three times he will appear on the site like Bloody Mary, the candy man and Beetlejuice.

Thanks! May go back to the stock covers and get rid of the fitech logo screaming at you when you open the hood.

I modified my stock air cleaner to fit my fitech. Not sure about the Edelbrock but I had to cut a hole in the side to allow the fuel regulator and lines to tuck into the side of the air cleaner. Went with a slightly thinner filter Element so it does not get in the way.

Heres what Sasquatch would look like in my Wimbledon white 66...

I had my cage built by Gordon at Bailie Bilt and he suggested a matt clear which is what I went with.

I went with a hammered silver vein which complimented my 66 silver interior, considered satin but thought this was a nice alternate to black.

Oldmil- Got the pics, I’ll take those. Sent you an email.

I have a 66 with a bench seat and it has two bolts that secure the seat back to the bottom. I figured they all had this and the ones that leaned forward we’re just missing the bolts. Makes sense that they do not fold forward as there would typically be a bulkhead behind them and no need for...

Those look great!

Best advice I can give after numerous hours on hold and speaking with Fitech support is to start data logging. There are so many little things that can separate your install from another which in turn will effect how you tune for your application. Data logging is the best way to see how your...

Power lift gate http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=152001394260&category=33655&pm=1&ds=0&t=1543206163000&ver=0

Could have swore it was stamped into my plate. There is a call out on the second line but nothing stamped as you said viperwolf. I had a written break down all of my vin/data along with 3900# GVW when I first bought the truck. Not sure how I came up with that. Any idea how I figure out what it...