4R70W Crossmember Mass Buy (West Coast Broncos)

chuzie · Jan 13, 2012

Migrated this from the OptiShift mass buy thread.

http://classicbroncos.com/forums/showthread.php?p=1986984&posted=1#post1986984

West Coast Broncos is offering their 4R70W crossmember in a mass buy at the following rates:

The rate will be
10- $150
15- $125

with a $50.00 core.

WCB has sandblasted them. The side plates will have welded nuts on so the frame will have to be drilled or plasma so the plate sits flush.

Here are some pics. Anyone interested?

Also working on a Lokar shifter cable mass buy. More to come.

justinkwitt · Jan 13, 2012

count me in

mattt · Jan 13, 2012

It's hard to tell in the posted pics....how did they deal with the frame brackets needing to move back ~2". From what I see in the pic, it appears to be a stock frame crossmember bracket?

fordguy · Jan 14, 2012

mattt said:
It's hard to tell in the posted pics....how did they deal with the frame brackets needing to move back ~2". From what I see in the pic, it appears to be a stock frame crossmember bracket?

also, i am not following where the nuts are welded on, which requires drilling or cutting. we will need to send them a stock crossmember to avoid the core charge, right? I would like to see the pic of just the crossmember (not installed). thanks for working this chuzie.

TheLimeRanger · Jan 14, 2012

anyone have a link to this product on wcb website?

kholding · Jan 14, 2012

This is actually a new product they just started making (that's my bronco in the pictures). I think you would have to call and talk to John to get the specifics about it. My trans has the Advanced Adapters tail section on it and I'm not sure if it would need to change with the stock tail section.

ilovemaui · Jan 14, 2012

What would the core be?

chuzie · Jan 15, 2012

Let me give them a call on Tuesday and get answers to these questions.

$50 core

Kyle.malone · Jan 15, 2012

Also ask if they will work with a standard AWD tailshaft. (what I have)

Butros · Jan 15, 2012

By the picture it appears that it would only work with the AA tail shaft housing. It doesn't look like it would work the the stock 4r70w 4wd/AWD tail shaft housing.

ilovemaui · Jan 15, 2012

chuzie said:
Let me give them a call on Tuesday and get answers to these questions.

$50 core

So you have to send them your cross member for the core?

chuzie · Jan 17, 2012

I think the stock frame bracket was removed and had nuts welded to the back of it then moved back two inches and welded to the frame.

WCB has no units on hand so they are going to build one for us and shoot some pics for me to post.

They do not have it posted on their site. I do not think it is something that has become a production item for them yet.

They have cross members on hand but don't want to see them all go out the door with no replenishment so there is a $50 core charge as a result.

WCB is not sure about the different variants of tail shaft housings that will be compatible. They only know what they did with kholding. We need to research the dimension differences with these variants to determine what is compatible. I know I will be doing the 4WD with a ZF adapter. So, depending on our findings, I may be out of the running for this cross member. Time for the 4R genius club to chime in.

Note that WCB, in order to make this worth the time and costs involved, will need to orders minimum.

I will post the pics as soon as they are received.

DEEPWOODS · Jan 17, 2012

The crossmember Pictured in post #1 will not work with the ford AWD or 4X4 tail ext. It is for the advance adaptors tail ext. I used bc broncos ZF crossmember and fabbed up a different mount bracket to work with the ford AWD tail ext. I have a thread with pics on this bracket it is a bolt in using the the stock bolt holes in the frame.I don't know how to post the thread here but some one can. I sent out templates to several members that asked for them But I have not heard back from anyone on how they worked out for them

chuzie · Jan 17, 2012

DEEPWOODS said:
The crossmember Pictured in post #1 will not work with the ford AWD or 4X4 tail ext. It is for the advance adaptors tail ext. I used bc broncos ZF crossmember and fabbed up a different mount bracket to work with the ford AWD tail ext. I have a thread with pics on this bracket it is a bolt in using the the stock bolt holes in the frame.I don't know how to post the thread here but some one can. I sent out templates to several members that asked for them But I have not heard back from anyone on how they worked out for them

http://classicbroncos.com/forums/showthread.php?t=183817

66Bronco · Jan 19, 2012

I'm interested but only if the cross member works with the 4R70W with the 4x4 tail housing.

I'll be following this thread closely.

Thanks!
-Terry

chuzie · Jan 25, 2012

This cross member is built to work with the AA 4R70W to D20 adapter. Whether it will work with other variations is unknown as it has not been tested and no one has spoken up about mounting differences.

justinkwitt · Feb 3, 2012

anyone else on board yet?

chuzie · Feb 3, 2012

I am still waiting for WCB to send me additional pics. Will be sure to contact them on Tuesday and inquire again.

chuzie · Feb 17, 2012

Here are the pics from WCB promised. Hope it answers some of the questions.

chuzie · Feb 17, 2012

Whoops! Let's try that again...

4R70W Crossmember Mass Buy (West Coast Broncos)

Bronco Guru

Newbie

Bronco Guru

Bronco Guru

Sr. Member

Bronco Guru

Bronco Guru

Bronco Guru

Bronco Guru

Newbie

Bronco Guru

Bronco Guru

Bronco Guru

Bronco Guru

Sr. Member

Bronco Guru

Newbie

Bronco Guru

Bronco Guru

Bronco Guru

Similar threads