• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What do 15x10s look like

mgb0302

Sr. Member
Joined
Jun 29, 2002
Messages
422
I got a great deal on some Mickey Thompson 15x10s with 3.75 BS. I currently have 15x8 chrome wagon wheels. Anybody have any pics of 15x10s? I want to see how the additional 2 inch width looks like/ how far they stick out.
 

sanndmann3

Bronco Guru
Joined
Jun 13, 2007
Messages
1,775
Go 12" :)
I went thru the same thing 10 years ago... have 35x15x15.5 wide Baja claws on 8" wagon wheels. tried to picture how the different width rims would look. I cut the tire loose and spaced it out from the rotor to visualize it...

1st shot shows the 8"rim on rear and 10" on front
2nd shot shows 12" wide rim on front.
last shot is the actual 10" wide rims that I went with. hope this helps... let me know if you need other angles.
 

Attachments

  • rims 003.jpg
    rims 003.jpg
    79 KB · Views: 49
  • rims 006.jpg
    rims 006.jpg
    80.2 KB · Views: 47
  • classic II 005.jpg
    classic II 005.jpg
    86.1 KB · Views: 60

Master Chief

Contributor
Bronco Guru
Joined
Nov 24, 2006
Messages
1,214
Look at my photos, you'll see the early photos of mine with 8" steel wheels and finally with 10" Eagle alloys. The 10 wheels allow the 33x12.50's to fill out.

FLY NAVY!

Roger
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,729
Loc.
Hawthorne ca
I have both with 35s. The 10s look and drive better on the street. The 8s work better off road if you need to air down
 
OP
OP
M

mgb0302

Sr. Member
Joined
Jun 29, 2002
Messages
422
All, great feed back. Exactly what I was looking for. Thanks for the pics.

SteveL- why do you think the 8s work better when aired down?
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,729
Loc.
Hawthorne ca
I haven't gotten in spot where I needed to but have seen many write ups that say the 8s will hold their bead better at lower pressure
 
Top