• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

AZ 4R70W to D20 adapter and crossmember

Status
Not open for further replies.
Joined
Jul 15, 2010
Messages
44
Loc.
Phoenix, Az
SOLD


P7250146.jpg


P7250145.jpg


Advanced Adapters tailhousing, shaft, and adapter to couple a ford 4R70W / AODE trans and a Bronco Dana 20. Crossmember is fabricated from several sizes of Chrome Molly tube, and includes poly bushings and spacers. This has been used for mockup, then we decided to use an Atlas.

you can see photos of it installed here:
http://classicbroncos.com/forums/showthread.php?t=188062
 
Last edited:

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
5,761
how were you going to attach the cross member to the frame
 
OP
OP
G
Joined
Jul 15, 2010
Messages
44
Loc.
Phoenix, Az
The crossmember ends weld to the inside of the frame. it drops out by way of the clamps, which you can see half of in the second photo.


Andre%27s%20Bronco%20fab-091.preview.JPG


Andre%27s%20Bronco%20fab-104.preview.JPG
 
Status
Not open for further replies.
Top