Half cab project

rmiller747 · Sep 30, 2013

Well waiting for the baja to get into/ out of paint the last couple months and not supposed to get it back till mid winter so I thought i would update you all on what I have been working on.

Picked up this project this summer. Frame was por 15'd and chassis, brakes and axles were gone thru. New disc package up front..

I replaced both rear quarters, driver side foot floor pan and front fenders ( all fenders were cut) only rust really in the rig was the floor pan I replaced. Fairly solid all in all. Cleaned up the under section of the body and sealed and painted. Seam sealed quarters, floors, etc.

I finished the Chassis (hammerite paint), removed the 3-1/2 inch lift front and rear. New 2-1/2 leafs will go in the back and new 2-1/2" springs up front. Removed all the bedliner from the bed (pain in the butt). Cleaned up engine bay. 1 coat of prime, 1 more to go. Going with rangoon red paint and white top. Belt line chrome trim, chrome bumpers. I already re-upholstered the bench seat. New foam and all. Ford factory slots will go on this (like my orange bronco...I love slots).

Still have to prep the grill and tailgate. A lot of work. Engine and trans out as I'm undecided on what im doing yet.

Pics below as everyone love pics. From as purchased to where I am today. ..

fordfan · Sep 30, 2013

The U-14 is looking good Rich! Is it a '72? The '72's are pretty rare dudes!....something like 1,200-1,300 produced. (a lot more rare than a '66 roadster). I really liked that original tan to on a half cab too; It may be because a buddy of mine in high school had a half cab that was that color. It as a 6 cylinder with a 3" lift and some narrow Q buckshots!

gritz · Oct 1, 2013

Looks like a fun project. What did you use to remove the bed liner?

rmiller747 · Oct 1, 2013

Bedliner removal....http://classicbroncos.com/forums/showthread.php?t=230299

1971. Wanted a Luber halfcab. Thinking resto mod (sticking as close to stock as possible) but upgrades since it already has discs and such.

TheBroncoRanch · Oct 1, 2013

Lookin good Miller, going to have to have you work on my 67

Blue Bastard · Oct 1, 2013

rmiller747 said:
Ford factory slots will go on this (like my orange bronco...I love slots).

Every guy loves sl*t's.....

As far as bed liner removal, we'll lets just say he won't need to cut his finger nails any time soon will you rich?

rmiller747 · Oct 2, 2013

TheBroncoRanch said:
Lookin good Miller, going to have to have you work on my 67

I think I did pretty good on my last 67. After all I did have a good mentor.

This one will be the Wife's driver. At least that's what I'm telling myself.

Unknown · Oct 2, 2013

Nice work Rich, you certainly do EB's right. Subscribed, again!

rmiller747 · Apr 10, 2014

Put a little time in in this while the Baja is still at paint. On a positive note supposed to get the Baja back any day.....

Half cab is almost ready for paint. Need to remove the front 3-1/2" springs. Going with a 2-1/2" Luber look. As stated previously this will be my wife's grocery getter. Going with Caribbean Turquoise with Wimbledon top. Bench seat. Disk brakes up front. Obviously glass top from bronco design before Mike let the business go. Safe, comfortable ride for the wife and baby girl.

Some bronco porn.

broncobsession · Apr 10, 2014

Looking good. I like how you notched the ceiling to fit 2 in there!

rmiller747 · Apr 10, 2014

broncobsession said:
Looking good. I like how you notched the ceiling to fit 2 in there!

Yeah. Never enough room for the broncos;D

Hank_ · Apr 10, 2014

Nice job Rich. Its nice to have some warm weather to work in. I have to replace the fuel pump in the bronco again. It looks like Saturday will be a good day for that. Maybe take the hard top off too. Looking forward to seeing the baja when it gets back from paint.

Henry

rmiller747 · Apr 10, 2014

hank_ said:
Nice job Rich. Its nice to have some warm weather to work in. I have to replace the fuel pump in the bronco again. It looks like Saturday will be a good day for that. Maybe take the hard top off too. Looking forward to seeing the baja when it gets back from paint.

Henry

Thank Hank. 2nd time for the fuel pump or you just never replace it again? Cheap parts or ?

Bronco cruising weather finally in michigan. Amen I agree.

Was hoping to have the Baja done by broncorama but I don't think that is going to happen. Damn painters are slower than a turtle. ;D oh well she'll be ready for summer.

Later, can't wait till the dunes

rguest3 · Apr 10, 2014

Now there's a great way to get to the Garage attic!

Looking good so far.

Ohio Bronco 21 · Apr 10, 2014

Nice work, keep it up.

BigBlueBronco71 · Apr 10, 2014

Awesome! jealous of you garage setup with lift!

JGbronc · Apr 10, 2014

Looking good! I really enjoy your builds, always top notch.

Hank_ · Apr 10, 2014

rmiller747 said:
Thank Hank. 2nd time for the fuel pump or you just never replace it again? Cheap parts or ?

Not sure if bad parts or what. I put a new Bosch fuel pump in it last fall. Took it out the other day for a drive and as soon as you would get about half throttle it would fall flat on its ass. Took it over to a friends house and under load the fuel pump is not keeping up with the motor. Just ordered one from Summit Racing. Should be here tomorrow. I hope this is the last time. Yes the dunes will be great.

Henry

Half cab project

rmiller747

Bronco Guru

fordfan

Bronco Guru

gritz

Sr. Member

rmiller747

Bronco Guru

TheBroncoRanch

Bronco Guru

Blue Bastard

Bronco Guru

rmiller747

Bronco Guru

Unknown

Sr. Member

rmiller747

Bronco Guru

broncobsession

Bronco Guru

rmiller747

Bronco Guru

Hank_

Bronco Guru

rmiller747

Bronco Guru

rguest3

Bronco Guru

Ohio Bronco 21

Bronco Guru

BigBlueBronco71

Full Member

JGbronc

Bronco Maniac

Hank_

Bronco Guru

Similar threads