• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pro's And Con's of Full Width Axles?

Steven Neff

New Member
Joined
Mar 26, 2011
Messages
17
Loc.
Arroyo Grande,Ca
I am wondering from all you out there that are running the full width axle set up about satisfaction and difference from stock width axles. I am currently trying to decide to run my stock axles or install full width axles. I am going to be running 3.5-4.5 SL and 2" BL with 35-37 " tires. I like the looks of the full width set up and gaining the clearance in lock to lock of tires. Is this a straight forward install? Any input would be much appreciated!
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Street rig or trail rig?

Others will fill in all the glorious benefits of full width, but having done some on other projects I do know of a few down falls.
Is it even legal? This will vary based on use and state. "Tires must be covered/not protrude past the body" states make full width a challenge if you are going to drive it on the street.
Side of the truck will never be clean. The slightest little mud will be slung all down the side of the rig.
That also goes with no longer able to hang the arm out the window. Besides the mud, the tires will kick up crazy amounts of microscopic grains of sand that will feel like your brother shooting you in the arm with a BB gun once every 3 seconds.
So there are plenty of downfalls.

There are a few functional upgrades that you get with it. The front axle comes with the larger U-joints and you should be sourcing one with disk brakes. Also get high pinion for better front driveshaft angles. Rear axle will default to big banjo housing and 31 spline axles. All that is simply with late 70's F150 or full size Bronco axles.
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
Offroad stability, especially if you are lifted a lot and run larger than 35-37" tires.
The "warflares" from WH will cover most of them unless you are running crazy wide wheels or have a wheel with little backspacing.
To me going full width only looks "normal" if you also stretch the wheelbase in length, which opens pandora's box with other issues. But that is my opinion...
The other thing to consider - are you going to run wider coil spring perches, make up the offset with a "bow" in the coils, or move the coil mounts inward?

Done right it can be pretty cool. Done poorly and it looks like you were throwing random parts together.
 

martinphoto

Jr. Member
Joined
Sep 15, 2007
Messages
96
As far as the coils, there is also the option of moving the coil buckets outward from the frame with spacers. That is the option I went with. Still in the build process so no feedback otherwise.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I spaced my coils out - I believe one of the vendors now sells buckets that are spaced out.

DSCI0197.jpg
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
homemade adjustable coil buckets!

i had 39.5 tsls and they barely rubbed the control arms.

the 37s i just installed do not rub or even get near them at full lock!
 

Attachments

  • DSCF1763.jpg
    DSCF1763.jpg
    115.3 KB · Views: 243
  • DSCF1765.jpg
    DSCF1765.jpg
    123.7 KB · Views: 226

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
You can tell rockslut has been around a while... great idea, because we WILL change things again... and again... :)
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
oddly enough those buckets look just like mine. either the PO copied them or bought them lol.

they are great because you can get your truck perfectly level!
 
Top