MO It's about time to finally get that Cage you've been wanting!

SpareParts · Mar 28, 2015

Spring is here and a great time to hit the trails with a new cage!
We are building several Family Cages to be ready by the end of April

Cages come in kit form
Cages are bent, notched and ready to weld together
Bends are smooth and notches are clean
Fits under a hard top or a soft top
Built from 1 3/4" .120 wall HREW steel tube (DOM extra)

Base Cage Kit is $800
DOM Upgrade is $200
Seat Tubing Option is $200 (See pic), DOM upgrade $50
Grab Handle Package $50 (See pic)
Shipping is extra. Most places in the US run about $180 for the Basic Kit.

Fully welded, media blasted and powdercoated bolt in cages also available for local pickup at extra cost depending on options. Due to all the variations, condition, age, and modifications done to EBs, we recommend fitting the cage to YOUR Bronco for the best result. The cage will need to be attached to the frame for safety and maximum protection.

Interested? Reserve Yours Today!
Contact Steve Mikulicz AKA "2Busy" or David Lindemeyer AKA "SpareParts" via PM.

2busy · Mar 28, 2015

Free Delivery if you meet us in Moab for the 2015 Bronco Safari!

Dbarnes72 · Mar 28, 2015

Any pictures with a hard top?

SpareParts · Mar 28, 2015

I don't think so, I already have the soft top on for Summer. It fits snug, but doesn't rub on mine. I would test fit the top before you final weld the kit together, it's easy to trim the legs for the clearance you want. Here's one that the cage is visible through the windows.

Doyle · Mar 29, 2015

Looks good. Couple questions. Does this clear the stock wiper setup? Can I get an extra floor bar to tie the rear legs together? Very interested, thanks.

SpareParts · Mar 30, 2015

Thanks Doyle,

Yes, it does clear the stock wiper set up with out a problem. As far as the floor bar, you are talking about one that goes side to side across the floor of the tailgate, correct? We can do that with no prob.

SpareParts · Mar 30, 2015

Lots of PM's coming in! All are responded too. Thanks for all the interest.

hucktruck · Mar 31, 2015

Are you a vendor now Dave?

SpareParts · Mar 31, 2015

Not quite enough to become a vender, I still have a day job. We have been building these for about 3 years now.

sprdv1 · Apr 1, 2015

Y'all been busy brother..

Great product for anyone needing a nice sturdy cage

SpareParts · Apr 1, 2015

Thanks Dave!

naneumranch · Apr 1, 2015

I second that great looking cage and easy to reassemble

I'm Just waiting on powder coating to get it put back in

2busy · Apr 1, 2015

Looks Great!

SpareParts · Apr 1, 2015

Cool, make sure you post some after pics too!

OB Bronco · Apr 1, 2015

Can you raise/lower a soft top with this cage?

SpareParts · Apr 2, 2015

I can with my Rampage top, in assuming you could with a Bestop as well. This pic shows how I have it down and rolled up at back.

OB Bronco · Apr 2, 2015

Awesome, Thanks!

SpareParts · Apr 3, 2015

No problem!

SpareParts · Apr 6, 2015

Two more weekends and we'll be building cages! Get your orders in!

SpareParts · Apr 11, 2015

We're a week away from building... Already have a bunch sold, let us know if we can help you!

MO It's about time to finally get that Cage you've been wanting!

Bronco Guru

Attachments

Jr. Member

Sr. Member

Bronco Guru

Bronco Guru

Bronco Guru

Bronco Guru

Sr. Member

Bronco Guru

REBEL

Bronco Guru

Sr. Member

Jr. Member

Bronco Guru

Sr. Member

Bronco Guru

Sr. Member

Bronco Guru

Bronco Guru

Bronco Guru

Attachments

Similar threads