I need pics of where you guys mounted the ARB stuff?

[Blue71]

Getting ready to install the ARB compressor and switches. Can you fill me in on the best location to put the compressor (pics if possible). Also ...wanted to see some (pics) and recommendations on where you put the switches for the lockers and compressor. I will have 3 switches..front/rear/compressor

Thanks Much,

Blue71

 

[astark]

Not the best of pics but here goes

 

[Krawln68]

The third pick Astark has is where mine is. Its nice, but even on a rubber pad, its noisy.

 

[elemetal]

Here's where I put mine. Out of the way yet accessible.

 

[cracker]

Here is a picture of my "handicapped" dash. It covers the old speaker hole in the dash.

 

[welndmn]

Mine is mounted to the passenger side firewall with some 4 inch angle iron.

 

[cracker]

Lets try this again, as I hit the wrong upload button :-[
The first pictures shows the dash with the ARB and A/C switch on my "handicap" board. This covers the original speaker hole in the dash.
The second picture shows the A/C setup under the hood using the York A/C pump and a CO2 air tank. This setup allows me to air up my tires rapidly or run air tools as needed.

http://www.classicbroncos.com/forums/attachment.php?attachmentid=22836&stc=1

http://www.classicbroncos.com/forums/attachment.php?attachmentid=22837&stc=1