Tips and Tricks on Getting the Transmission re-installed

[.94 OR]

Pretty similar to my setup. I was able to use a ratchet strap when lifted high enough to start snugging the assembly forward while I rotated the output shaft and wiggled the assembly to align with the pins/shaft.

 

[Jdgephar]

That looks like it worked really well

Really simple. Goes back in the same way, just lift it up, and shove it forward once lined up. That lift cart has been so handy!

Sent from my SM-G981U using Tapatalk

 

[clinem03]

That lift cart is awesome, wish I could have bought that vs the trans jack!!