• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

lubers are just freakin sweet!

johnnybgood74

Bronco Guru
Joined
Mar 4, 2009
Messages
1,135
Loc.
boise, idaho
after checking out some current threads about cut or uncut quarters, makes me wish i could bring mine back to the original uncut condition. just something about them. i wasnt sure that they would do worth a damn all jacked out of shape on some rocks but after looking at the threads, they can handle anything that i could throw at them!! man, that would probably be ALOT of work installing new quarters? for those who have done it, is it a pain in the butt?
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
It is not that bad.

The aftermarkets are not the best fit in the world, but can be made to work. Complete NOS FoMoCo quarters are the way to go (upper and lower, tail light housing, door striker post, wheel tub and extension panels all assembled), but expect to pay $1200-$1500+ each.

You could also do like Bax and some others have done and graft in some uncut openings higher on the body. Great look and easy to clear much larger tires.
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
It isn't too bad replacing the quarters. The lines and the slopes don't all match exactly, but they still look pretty darn good.

As a side note, I still have the cutouts from my fenders. I was planning on putting them in the for sale section for cheap to see if anybody wanted them to "uncut" their cut EB.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Check out the second section in this link. It shows how to return a cut Bronco back to uncut without replacing the entire quarter. A ton of work though.
 

nelson_bros

Jr. Member
Joined
Jul 11, 2008
Messages
107
Loc.
los anchorage
Devin,

have you thought of a price for your trimmings? how much did you cut? do you have pics?

i have been trying to map out a plan to do on mine what Bax did to his fenders, but the parts are a little hard to come by up here in AK.:-[

thanks,
jarrod
 

TCheney

Jr. Member
Joined
Mar 8, 2006
Messages
147
I returned my Bronco to uncut. I used the pieces after a friend cut his. Trimmed to fit. Tacked them on & then welded (another friend did the welding). I learned a lot about bodywork in the process. My Bronco isn't concours condition, but my amateur bodywork looks good for a daily driver.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
I returned mine to cut but my wheels were too wide and they rubbed even on flat ground. But I did the same thing that TCheney did. About a million tack welds, a grinder and some filler and you're good to go. Not hard but it will try your patience. There are pics on page one of my build thread if you're interested.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
Here's a pic - man, makes me want to go back again...knowing it still wont work!

I think its the stock front fenders as much as the rears that do it for me.
 

Attachments

  • uncut.jpg
    uncut.jpg
    133.7 KB · Views: 198

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
i just might bring it back. its cheaper than fender flares too!! LOL

If you do, here's some advice for ya.

33x12.5x15 on an 8" wheel with 3.5" BS will be too wide. This is what I had. I even trimmed the inside of the rear quarters to gain another 1/4". I even put on a 1" BL for more clearance - no go.

You'll need a tall skinny tire or a rim with 4-5" of backspacing to make this work.
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
I haven't really thought about a price. I cut them out pretty big. I will get some measurements this weekend and put them up in the classified section.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
LOL, Yes some of them are Sweet... Would be nice to have one of both :)
 

75 Ranger

Sr. Member
Joined
Jul 23, 2008
Messages
820
33x12.5x15 on an 8" wheel with 3.5" BS will be too wide. This is what I had. I even trimmed the inside of the rear quarters to gain another 1/4". I even put on a 1" BL for more clearance - no go.

You'll need a tall skinny tire or a rim with 4-5" of backspacing to make this work.

Yep too wide.
So I went with a 31x10.5x15 on an 8" wide wheel with 3.75" BS and it's pretty darn perfect without rubbing. I think it looks good proportion wise with my 3.5" suspension lift.
33" tires can be done, but only in the 9.50 width (BFG's) on a 7" wide wheel.
Others have gotten 33's on an uncut by moving the axle back a couple inches. There may be a few other small tricks to getting the 33's to work, but 33x12.5x15 is definetly way too wide.
This has been my experience.
When I was trying to figure out my LUBR build I had searched all over this and other sites as to what would work and what wouldn't and it was very frustrating because there was not much info out there and everyone had different opinions. I wanted 33's, but it just didn't work out with what wheels I wanted (slots).
 

willtel

Sr. Member
Joined
Oct 3, 2003
Messages
598
Does anyone run the 34" x 10.50" Super Swamper LTBs on an uncut Bronco?
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
Putting quarters on isn't that bad at all. I didn't go to the factory seams I cut below and used a flanging tool and bonding adhesive to put mine on. I moved my wheel opening foward about 1" for better tire clerance when the tire are stuffed, and they still rub some. The current plan is to cut off the rockers for rock ski's to solve the rub issue. If I was to do it over I'd redrill the spring perch to move the axle back 1".
 
Top