• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dodge 17" Wheels Question

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Three questions about the Dodge wheels -

1) Do these fit?

https://delaware.craigslist.org/wto/d/set-of-brand-new-tires-on-ram/6418334912.html

They are from the same era as the steel wheels I have seen posted on here with the holes in the face.

2) Can we use the Dodge wheels (these are 17") on a stock suspension truck? I want better handling and road manners and my current tires are 20 years old.

3) Other than enlarging the hole in the front wheels do I need to do anything else?

Thanks!
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Some of the Dodge ram truck wheels will bolt on but many of the newer wheels they are using have too small of an opening for the Bronco front hubs or back spacing that will not work. On some wheels the hole can be opened up to let you use them.

The steel ones on recent threads have been from the Dodge sprinter or similar vans (not the ones you linked). With this style the backspacing will work but the hole may need to be opened.

These might be the correct ones but I would measure to be sure: https://delaware.craigslist.org/wto/d/wheels-tires-for-sale/6397545025.html
 
Last edited:
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
The Sprinter wheels look different than they Dodge pick up baseline wheels which I think fit. But I do not know I'm looking for someone who put them on.

I like the link but that is a looooong drive! Can yo find any in southern PA or NJ??
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
Dodge 1500 17" wheels do have quite a bit of back spacing which works great on LUBERS but it tends to make the locking hubs stick out a little. You do have to open up the centers a little you can have a machine shop do them or make a jig to use a hole saw like I did, I have $120 wrapped in the five wheels I have, did this wheel mod around 10 years ago.
 

Attachments

  • LUBER 255's.jpg
    LUBER 255's.jpg
    113.2 KB · Views: 432

Howard2x4x4

Contributor
Bronco Guru
Joined
Apr 19, 2014
Messages
2,474
Got any other pictures and details on those windshield mounted mirrors 1sicbronconut? Thanks.
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Dodge 1500 17" wheels do have quite a bit of back spacing which works great on LUBERS but it tends to make the locking hubs stick out a little. You do have to open up the centers a little you can have a machine shop do them or make a jig to use a hole saw like I did, I have $120 wrapped in the five wheels I have, did this wheel mod around 10 years ago.

That is exactly what I want! Do you have a range of years / models?
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
The Dodge (04-12) 1500 17x7' wheels fit perfectly on a LUBR. I would guess 4.5" backspacing. This wheel easily clears the 76-77 Front Knuckles too.

The Center Hole will need to be Bored by a machine shop to clear the Front Hubs. I also had holes drilled and tapped to mount the later 92-96 Bronco Center Caps. I then painted them an Argent Silver Color.

The wheel pictured has a 265/70/17 Tire mounted.
 

Attachments

  • 76 Bronco - 17%22 Tire and Wheel.jpg
    76 Bronco - 17%22 Tire and Wheel.jpg
    67.4 KB · Views: 288
Last edited:

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
Dodge 1500 17" wheels do have quite a bit of back spacing which works great on LUBERS but it tends to make the locking hubs stick out a little. You do have to open up the centers a little you can have a machine shop do them or make a jig to use a hole saw like I did, I have $120 wrapped in the five wheels I have, did this wheel mod around 10 years ago.

Not really but the old timers will remember the "mikey mirrors" from way back when guy named Mike Bowlin from Grand Junction Colorado made them 10 plus years ago.
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
The Dodge (04-12) 1500 17x7' wheels fit perfectly on a LUBR. I would guess 4.5" backspacing. This wheel easily clears the 76-77 Front Knuckles too.

The Center Hole will need to be Bored by a machine shop to clear the Front Hubs. I also had holes drilled and tapped to mount the later 92-96 Bronco Center Caps. I then painted them an Argent Silver Color.

The wheel pictured has a 265/70/17 Tire mounted.

Thanks this looks perfect.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
I used a Dodge steel wheel for a spare on my 78 Bronco. As noted above I used a jig and a 3 1/4" hole saw to enlarge the center hole. I think I paid $15 for the wheel at a pick-n-pull JY. It was the spare tire wheel on an early 2000's Dodge Durango. If you can find some second-generation Durangos at local junk yards it's a way to pick them up cheap.
 

Attachments

  • IMG_5087.jpg
    IMG_5087.jpg
    150.8 KB · Views: 238
  • IMG_5090.jpg
    IMG_5090.jpg
    124 KB · Views: 218
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I used a Dodge steel wheel for a spare on my 78 Bronco. As noted above I used a jig and a 3 1/4" hole saw to enlarge the center hole. I think I paid $15 for the wheel at a pick-n-pull JY. It was the spare tire wheel on an early 2000's Dodge Durango. If you can find some second-generation Durangos at local junk yards it's a way to pick them up cheap.

Brilliant! Now for craigslist to come through or the weather to warm up.

Did anyone notice an improvement in handling with more modern tires? The sidewalls are bigger, even with a 17" wheel, so I think it may handle worse??
 
Last edited:

Geniusloerts

Full Member
Joined
Mar 16, 2017
Messages
183
I used a Dodge steel wheel for a spare on my 78 Bronco. As noted above I used a jig and a 3 1/4" hole saw to enlarge the center hole. I think I paid $15 for the wheel at a pick-n-pull JY. It was the spare tire wheel on an early 2000's Dodge Durango. If you can find some second-generation Durangos at local junk yards it's a way to pick them up cheap.

How did you keep the hole saw centered? I have 5 I need to do
 

WheelHorse

Bronco Guru
Joined
Nov 22, 2004
Messages
2,511
I used a Dodge steel wheel for a spare on my 78 Bronco. As noted above I used a jig and a 3 1/4" hole saw to enlarge the center hole. I think I paid $15 for the wheel at a pick-n-pull JY. It was the spare tire wheel on an early 2000's Dodge Durango. If you can find some second-generation Durangos at local junk yards it's a way to pick them up cheap.

Lucky!

Any spare here in the rust belt will be so cancered up, unless you have a trail rig only, it wouldn't be worth the time to seek them out up here.

Unless someone has a set of take off's from way back in 2012 sitting in their basement.
 

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
Anyone know what the backspacing is on these Dodge wheels? They're steel, 17x8, and 5x5.5. The center bore would need to be opened up for the front. They were used on mid-2000s 1500s. I can't find any reliable backspacing info on them.

from a craigslist ad

01212_fQOWCpXjMtv_600x450.jpg
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I never really got an answer to one of my key questions - do these work on a stick height truck?
 
Top