Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I built my own windshield braces, and made these brackets to attach the braces to the windshield frame using the riser bolt holes. Still need to shorten the bolts down a bit!
That's weird. From your pics it looks like if it was orientated in its current position you would have to remove the crossmember and mounting bracket to service your trans filter. If that is the case, send that thing back to BC and buy Tom's bracket (for a lot less money). You shouldn't have...
That straight run of frame your radius arm brackets are welded to should be pretty close to level when the body is on. Compare the intake manifold carb base to it.
Have you tried rotating that bracket 180 degrees yet? There is no way it should be oriented in that position.
BC's picture of...
It looks like the bracket that goes between the adapter and the crossmember might be installed backwards. In its current configuration it is going to be (nearly?) impossible to drop the trans pan.
I have the TBP crossmember and it fit perfect...
👆
Not only does the Explorer front dress swap give you a better alternator, it also gives you a factory clutch fan that fits in our engine bay and can really suck a lot of air through the radiator!
The struggle is real, Brotha. I'm 5'9" and have to scrunch down If I am one of the first few in line. Might want to check out nvrstuk's thread on how he lowered his floors. Don't let your disability slow you down. lol.