Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
Torkman66

Torkman66

Contributor
Sr. Member 63
Joined
Last seen
Messages
500

Latest activity Postings Attachments Images About

    • Torkman66
      Torkman66 replied to the thread Brake Question.
      Nice! Thanks Matt!
    • Torkman66
      Torkman66 replied to the thread Brake Question.
      Removed rear wheels. Used video to adjust parking brake. Pedal nice and firm with engine off. Start truck, peddle nice and firm! This...
    • Torkman66
      Torkman66 replied to the thread Brake Question.
      That is normally an issue with disc in front drums in back. Going out now to work on adjusting the parking brake, Confident that is...
    • Torkman66
      Torkman66 replied to the thread Brake Question.
      Couple updates. @DirtDonk you always go above and beyond to dig in and help. You are a major reason this group is so amazing. Thank...
    • Torkman66
      Torkman66 replied to the thread Brake Question.
      Never discussed before. I’m sure the double bleeders top and bottom are just so the calipers can be used on either side. I’ve done a lot...
      • IMG_9072.png
    • Torkman66
      Torkman66 posted the thread Brake Question in Bronco Chat.
      I have installed an entire new brake system from the peddle to the four disc brakes and everything in between. Bench bled MS and then...
    • Torkman66
      Torkman66 replied to the thread C4 issues.
      The bad shoe video is outstanding. I had never built one and used his video. Had a couple questions and he responded with answers via...
    • Torkman66
      Torkman66 replied to the thread LA Needed this water outlet.
      I’ve seen it before. I also think the dizzy has to be removed to turn it into place because when turning the elbow hits base of dizzy. I...
    • Torkman66
      Torkman66 replied to the thread Damaged Dana 44.
      It’s been a while since I rebuilt mine but if I recall, the seal sits behind that section and the bearing sits in front. I believe that...
    • Torkman66
      Torkman66 replied to the thread Scott Drake Tire Tread Billet Dash Kit.
      On one of the bezels I saw that there were two different holes for the pin and the pin could be moved to the other hole. Not sure if...
    • Torkman66
      Torkman66 replied to the thread Painless Harness Parking Light Question on a 1974.
      I would add a section on wiring with a 1 wire alternator as well. There are several posts asking about what to do with 915 and 916. They...
    • Torkman66
      Torkman66 replied to the thread New Painless first power issue.
      Agree.
    • Torkman66
      Torkman66 replied to the thread Painless Harness Parking Light Question on a 1974.
      Good idea. I would add that wires on passenger side through firewall are great length with plenty of room to reach headlights and...
    • Torkman66
      Torkman66 replied to the thread New Painless first power issue.
      Brand new sockets from WH. I examined them closely. The contacts without a bulb can easily touch. Nothing holds them apart except for...
    • Torkman66
      Torkman66 replied to the thread New Painless first power issue.
      I did not know that either. The issue only applies to the side parking lights with the tiny bulbs that push into a knife slot.
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top