Community
Buy / Sell
Bronco Tech
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
ba123's latest activity
-
ba123 replied to the thread A/C line routing help.Here's my thread. https://classicbroncos.com/forums/threads/vintage-air-gen-v-install.320813/ -
ba123 replied to the thread Frame Mounting Fuel Pressure Regulator.Totally…I mentioned earlier that I just haven’t gotten around to removing it. Trying to fix some issues, still breaking it in, and still...
-
ba123 replied to the thread Frame Mounting Fuel Pressure Regulator.Here is a better pic of mine to see how it’s kinda protected but removing the regulator like I should will be better. It’s directly...
-
-
ba123 replied to the thread Frame Mounting Fuel Pressure Regulator.I thought about the frame rail for mine but eventually decided a better spot low on the body but somewhat better shielded. I’d snap a...
-
ba123 replied to the thread Vintage Air..No you do not "need" that hole and mine is deleted in my build. I routed my hoses a completely different way as I think what they do...
-
Here's a hodge podge of pics that I took a few weeks ago when I was installing it. Some show the cooler install and some show some of...
-
ba123 replied to the thread Another rear main seal question.I have had really good luck with spray adhesive remover...this one: https://www.amazon.com/gp/product/B000BQYA7W/?tag=classicbroncos-20
-
ba123 replied to the thread Another rear main seal question.Sorry, late to this party…what about a slide hammer. That would prob be the easiest.
-
Beautiful work BA123!!!!
-
ba123 replied to the thread 4R70W Temps and Cooler.Hope that works! I have braided ptfe lines in a couple spots and was going to use them in the new trans setup for the short run...
-
Thanks for all the pics. I recently redid my trans cooler lines (I'm using braided PTFE lines) and they were about 1/2" away from the...
-
ba123 replied to the thread 4R70W Temps and Cooler.I'll try to find a pic, but they were only just on top of the frame rail and shorty headers almost hit the frame on the pass side, but...
-
-
I too went trans to under pass seat area cooler with fan and 1qt filter just for extra capacity. In town at stops, during Stockton...
-
ba123 replied to the thread 4R70W Temps and Cooler.I just struggled with my own trans cooling and found two issues...(1) the exhaust was too close to the trans pan and (2) My trans...
-
ba123 reacted to jamesroney's post in the thread Explorer Power Steering Pump to Reservoir Pressure? with
Like.
We gotta be careful with the language a bit. So you are going to need to invent a new term. The P pump is indeed the canned ham pump...
