Recent content by csmadkins

Bingo. The fuse clips are indeed rusty. I scraped them and tried to clean them as well as the fuse which was rusty too. Gona replace the fuse and work more on the clips. Thanks

i replaced the hazard switch and checked voltage at plug. Have 12volts present. hazard lights still only work when turn signal is pressed left or right. When i press the brake with the hazard switch on and the turn signal in either position the flashing stops and both indicator lights stay...

I have a 70 Bronco with a turn signal problem. Replaced a worn trailer harness several months ago due to malfunctions and now the turn signals don't work correctly. When the trailer is hooked up I turn the signal left or right and the correct tail light works properly but the opposite side...