Recent content by ECEB

What a pain to add photos. Steep learning curve. I just posted on Facebook because it said it was supported. Here is the link to the 9 photos: https://www.facebook.com/groups/915810405156976/permalink/7486832991387985/

UPDATE: 9 Photos on Facebook https://www.facebook.com/groups/915810405156976/permalink/7486832991387985/ Hello All, I have a hard top that I had planned to use on my 1973. I built the truck to so I could run it in every configuration possible adding a bulkhead, bench seat, half cab top, soft...

I can update this thread more if it helps anyone but you won't believe what the source of the problem was: automatic choke. The carb had been rebuilt but this was never serviced. I just brought the truck on a pretty major road trip from CT to Iowa to New Orleans, Florida and then back and in...

I'm looking for a carb and intake to replace the stock 2 barrel on my 73 with a 302. I don't want to rebuild again and deal with hesitation and automatic choke quirks. The setup just needs to be complete and in good working order or easy to get it to that condition. I know I've seen lots of...

PM Sent to You

There has been at least of one for sale on here a few years ago. It was in really good shape and with the truck it was 25K-30K. The world is moving fast as that was expensive then...

jckkys, this is a really good question that I wish I had included. If I am stopped at a light and it's shaking, if I switch out of drive and put it into neutral it STOPS shaking. I often do that when I can't take the annoyance of the shaking. I think this doesn't rule out a few options that...

By saying "switching out of a mode" - I am just referring to it being shaky or not. Just picture any older car at a stop light next to you and it is kind of shaking a little bit while the person is waiting. My truck does this most of the time and then at about 15 mph it becomes smooth without...

I don't know about this. It should be the original 302 from 1973 and original rebuilt transmission. Perhaps a fault within the flex plate?

I can ask my local shot to check for that. We've messed with idle mixture but I'm not sure about vacuum leaks. It seems like when it gets in slow speeds or is stopped it vibrates a little and then it ends up in harmony with the next vibration kind of doubling it's impact and grows to a certain...

I like what you are saying about having had all the types of shakes that a bronco can have. Where are you located? I'd pay you to take give me your opinion... I feel like the shake is coming from somewhere in front of the driver's seat if I have to guess so - engine bay most likely. The...

I thought about doing something with a gopro strapped underneath to see if I could see something that was off. How did you rig your camera? Very strangely, I have gone through two driveshafts and now have a super heavy duty one. it is a continual shutter and then it's like it clicks out of...

He's a legend but I won't be back in town. Tell him Tony from Indonesia sends him all his best if you think of it!

That's a good guess but I don't think it is it as the car was rebuilt and the problem is slightly intermittent. It usually happens but occasionally it does not. Let's say 90% of the time.

Oh yeah, and I have plans to do a road trip across the country this summer. We took this particular truck from CT down the East Coast and over to New Orleans and the only issue was overheating when the temp was 100 outside. Since then, a big fan has been added. This is definitely meant to...