Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recent content by edge4

  1. 1973 Orange Bronco

    1973 Orange Bronco

    • edge4
    • Album
    • Comments: 0
  2. 1975 Silver Bronco

    1975 Silver Bronco

    Restoration in Progress
    • edge4
    • Album
    • Comments: 0
  3. edge4

    Antenna Question

    Here a pic of the trooper antenna Antenna and routing
  4. edge4

    Explorer serpentine/hydroboost PS reservoir

    The Astro Hydroboost used a small reservoir tank. I've attached a couple of pics of mine.
  5. edge4

    LEBC Austin Get Together

  6. edge4

    Aero Fuel Door Install

    Tech article by John Edgecomb (edge4) The use of racing "billet" fuel doors has become a popular upgrade to both street and off-road vehicles. There are two versions of the billet fuel door available for the Early Bronco. The first is a large billet "door" that covers a recessed stock fuel cap...
  7. edge4

    Electronic Fuel Injection

    Tech article by John Edgecomb (edge4) Click here for the parts list. One of the most important elements of any Early Bronco EFI conversion is the fuel system. Due to the high-pressure requirements of the fuel rails and injectors, the stock pump and fuel lines are completely inadequate. The...
  8. edge4

    Axle flange gasket

    Jeff, Thanks for posting the number. I have ordered four incorrect sets already. I can see by the photo you also have the famous big bearing, 3/8" stud, medium duty, "Torino" housing ends. I have not found a local parts house that has a clue about the 3 different flanges found on a 75' Bronco. Edge
  9. edge4

    Sema 2007

    Yes, I'll be there all week. Edge
  10. edge4

    Bead Lock Wheels

    Centerline now makes a DOT approved beadlock. I saw them at the SEMA show last week. The best designed beadlock I've ever seen. http://www.centerlinewheels.com/wheels_detail.php?mw_id=33&sw_id=390
  11. edge4

    ZF install question

    Ben, The ZF has a neutral safety switch. Ford sells the connector. Drivers side red socket above the slave hydraulic lines. http://classicbroncos.com/photos/showphoto.php/photo/241/ppuser/6762
  12. edge4

    Where can I buy an inertia switch

    At your local Ford Dealer. Part # E1AZ-9341-B. Around $30.00 as I remember.
  13. edge4

    Bilstein Shocks

    I forgot to answer the other question. Length is a tougher issue. It's best to check your setup first. Standard Bronco is the 22ext/14comp/8"travel but you may need the 25/16/10. They also mentioned some sort of loop to stud adapter available now so you don't have to modify your towers.
  14. edge4

    Bilstein Shocks

    I spoke with Bilstein at the SEMA show last month on this. Everyone has their own opinion, but here is theirs. They said most people over do it on dual setups. Second, most EB's will run perfect with one good set of shocks. Dual setups are for high speed Baha type racing where fading is a major...
  15. edge4

    Custom master cylinder

    I talked with CPP at the SEMA show last month. They are just now shipping the 1" bore version of the MCPV1 due to manufacturing delays earlier this year. They expect to start shipping the 1 1/8" bore in Feb. 06'. Unit is the size of the popular corvette M/C but a fraction of the weight...
See more
Top