• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recent content by jmhend

  1. jmhend

    Is anyone running a Duff 1.5" Ultimate LUBR lift on an UNCUT Bronco?

    You should have no problems fitting a 31 under a 1.5' sl and a 1" bl
  2. jmhend

    What have you done to your Bronco today?

    Did you go with the 22mm or 25mm button? And did you have to do and modification to the dash / ignition hole?
  3. jmhend

    my build thread.......finally...Bocci?

    Looks great Sent from my SM-N986U using Tapatalk
  4. jmhend

    Is anyone running a Duff 1.5" Ultimate LUBR lift on an UNCUT Bronco?

    This is a 2.5” lift with 1” body lift with 33’s on a stock wheel. It all matters ever a little. Sent from my iPhone using Tapatalk
  5. jmhend

    Is anyone running a Duff 1.5" Ultimate LUBR lift on an UNCUT Bronco?

    Understood, body lift, and tire size all matter in a slight but varying degree. Sent from my SM-N986U using Tapatalk
  6. jmhend

    my build thread.......finally...Bocci?

    Looking great, Pat if you need twin stick I got you. But, not the cool hand grenades. Sent from my SM-N986U using Tapatalk
  7. jmhend

    Is anyone running a Duff 1.5" Ultimate LUBR lift on an UNCUT Bronco?

    Are you thinking about a body lift? Sent from my SM-N986U using Tapatalk
  8. jmhend

    My 72 half cab build.

    Looks great Pat. I want to do a hydroboost on two of mine. Sent from my SM-N986U using Tapatalk
  9. jmhend

    Tire carrier’s

    One thing that I see in your garage pictures is wehre the mounting bilt is through a lug hole on the wheel. People will always second guess you and offer opinions. It is factory for sure. In Slowleaks post you should buy the disk (AKA the mounting plate) and center the tire up...
  10. jmhend

    Rear bumper

    Mark have you made a decision? Bailie Built “The Rear” has a nontire carrier version. This is fresh out of the booth (I am adding it to one of mine). Getting what you want and what works for you is key. I have a tire carrier that I am removing babies of the weight and in never needing it I...
  11. jmhend

    DIY Charcoal Canister

    my pont was replace the charcole when you get an inspection (your state my not do that anymore but its annually in other states)
  12. jmhend

    DIY Charcoal Canister

    Right makes sense, and if you service it, say at the same time you do a state inspection, then that is your annual reminder. Sent from my SM-N986U using Tapatalk
  13. jmhend

    DIY Charcoal Canister

    Thanks for sharing this, I am going to try my best to install this next week.
Top