Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I misspoke. The lower hose is the SD hose that others use as well. I got it on RockAuto. I got it to work by cutting about a 3rd of it off and using most of the original lower (just trimming the water pump end).
Yes. That is the upper hose I am using. I went back and played around with it a bit. I can get it to work by routing on top of the P/S bracket, but it looks kinda funny. I'm guessing it fits better with that lower Saginaw pulley and an extended shroud.
The lower hose is still a problem. I’m...
I just completed the Exploder front dress swap myself. That tech write-up is excellent. But now I'm stuck. I've got everything done except for hooking up the radiator. I bought the upper and lower hose kits from BC Broncos (which are just stock hoses for another application) and neither of them...
I wasn’t getting notified that people had replied to the thread but I thought I would. Sorry about that. I was replying to DMs because I was getting email notifications. Please send me a DM if you are interested in something. Like I said I still have most stuff I listed and more.
Please DM me if you are interested in anything. I still have almost everything and so many parts that aren’t listed. For example I have a complete, running 302 from a 77. I’d also be up for trades if you have anything I need. I’m looking for tbird calipers, hydroboost, serp Saginaw parts...
I’m trying to figure out my 4g alternator wiring conversion after swapping on the Explorer serp. After removing my voltage regulator and the connector I am left with three wires. I know the green one in the middle connects to the alternator plug. What about the other two? The long one on the...
I have so many parts for sale. I need to get these to a good home:
All the front engine accessories off a 76 302 with v-belt (doing serpentine swap ad pulled these off:
Working alternator with all brackets and bolts
PS pump with all brackets and bolts and high pressure line (I’m not sure how...
Thanks for your input. I am trying to follow what you are saying. It sounds like the issue is that the crank pulley won’t align to the Saginaw pulley. Is that accurate? If so, is there a vendor that sells a Saginaw pulley designed to adapt the factory Saginaw bracket? I’m really surprised by...
I finally joined the EB club and got a 76 to work on with my son. The power steering needs some TLC. I’m replacing the leaking gear with a Lares unit. The pump is also done for.
I’ve got an original Saginaw bracket from an Econoline. I pulled it myself a few years back and got the pump, hoses...
I put a ProFlo 4 on my 460 in my 84 Bronco. Took all of an hour to program and has run flawlessly ever since. I really like it. I’ve since convinced many others to use it in their builds and they all like it too. Only one guy ever had a problem and it was due to a bad injector from the factory...